• 12/24V DC severe duty winch rated at 22.000 lb pulling meets or exceeds your expectations
• Waterproof and dustproof construction
• Potted contactor and motor provide complete protection from water penetration and allow dependable operation in up to 1.8 meter of water.
• Rubber seals at motor and gear housing joints for independent water protection
• Double lip and spring seal at drum support racks
• Industrial duty remote control with twist-on connector to provide total protection from water.
• Water-proof remote control with thermometric LED indicator alerts when receiving a warning signal from the motor over-heated.
• Tough aluminum die cast housings withstand strength of 2 times winch line pull at least.
• U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slippage.
• Corrosion resistance 720hr
• Meets international standards of CE Machinery Directive 2006/42/CE, CE Electromagnetic Compatibility Directive 2014/30/EU, and SAE J706 Surface Vehicle standard 2003-08 rev

 
    Part number:

•  281800 (12V) / PN 281810 (24V)

   Rated line pull:

• 8,165 kg / 18,000 lb single line

Line speed ( 1st layer)

5.2 mpm / 17.1 fpm 45 A at 12V, 7.0 mpm / 23 fpm 35 A at 24V no load

0.8 mpm / 2.6 fpm 320 A at 12V, 1.7 mpm / 5.6 fpm 210 A at 24V full load

•     Motor: 5,220 w / 7.0 hp 12V series wound
•                4,474 w / 6.0 hp 24V series wound
•     Gear train: 3-stage planetary 343:1
•     Clutch (freespooling): Rotating ring gear
•     Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
•     Winch construction: Aluminum die cast housings with steel drum
•     Drum size: 89 mm x 204L mm (3.5" x 8"L)
•     Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
•     Rope type: 6 × 29 - IWRC (Breaking strength 100.7 kN)
•     Rope size: 11.1 mm x 27 m (7/16” x 89’)
•     Mounting bolt pattern: 254 mm x 114.3 mm (10” x 4.5”)
•                                             254 mm x 165 mm (10" x 6.5")
•     Mounting: Foot forward mounting only
•     * Remark: Only foot forward mounting can meet SAE J706