DNA Off Road


Ready Welder battery powered MIG welder

Be the first to review this product

Availability: In stock


Quick Overview

The Ready Welder is a compact battery powered MIG welder.

Note: If there are no shipping options available for your address, please contact us.

Ready Welder battery powered MIG welder

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


The Ready Welder is a compact battery  powered MIG welder.  It operates on one, two or three 12 volt DC batteries in series, producing up to 350 Amps of power for deep penetration of metals. For thinner metals a 12 and a 6 volt battery connected in series to produce 18 DC volts and lower Amps works well too.

The Professionals who use it, report that the Ready Welder is a high yielding asset in their welding trade, because of it's lower initial cost plus it's lower operating costs. A smaller truck can be used to go out for field repairs with the Ready Welder. The setup time and electrical usage costs are less than before they began using this Product.

The Ready Welder can also be used as a Spool Gun, by connecting it to a Stick Welder or a conventional MIG machine. It operates from 240 AC volts while plugged into any welding device which might require a Spool Gun, for example, as when welding aluminum.

The Ready Welder, in it's case, is light enough to be hand carried.

Powerful This MIG Welder can be powered by batteries, or by  AC current when connected to a welding machine as a Spool Gun

Amperage range The Ready Welder welds very thin metals using a 12 and a 6 volt battery, (18 volts) or very thick metals with 36 volts DC, (three 12 volt batteries) yielding from 45 amps, up to 350 amps of power.

Versatile Welds steel, stainless steel, aluminium, or any weld-able metal or alloy. Use it as a Spool Gun or as a stand-alone welder. Ready Welder II welds with, or without a gas tank, as with flux core wire.

Economical User friendly, quick setup time, economical to use, low purchase cost, are among the factors making it a "must have" for every tool box.

Unique The Copyrighted design and Patented Circuitry make it a unique product which fills a previously unmet need, worldwide.
Safe After a history of nearly 10 years of operation, the Ready Welder Corporation has had no report or claim of any injury from use of the Ready Welder.

The 10000-CS is cabled best for battery operation. This model will also connect to all CV (constant voltage) and DC (direct current) output machines - contact us for more details. This model is most frequently used by repairmen, maintenance workers, 4X4 off-road enthusiasts, farmers, boating enthusiasts, agricultural industry and anyone primarily using batteries as the power source.

The ground cable is attached to the red dual quick disconnect connectors. This makes welding jobs in remote locations easy, portable and quick. This model will run off any 12, 18, 24 & 36 volt batteries in a parallel series depending on the application and material to be welded.

This model includes the cold switch option that prevents unintended arcing [as specified and used by the US military].  Without the cold switch option, the tip of the welding gun is live at all times when connected to a power supply.

Welds Steel, Stainless and Aluminum or any metals where standard 450g or 1kg spools are available.

Connects to Batteries
– 12-18 Volts can do thin sheet metal
– 24 Volts will single pass 12mm @ 275 amp
– 36 Volts will Weld up to 19mm @ 350 to 400 amp

  • Welds 22 Gauge to 19mm
  • Connects to MIG/constant voltage output welders
  • Uses wire sizes from 0.6 to 1.2mm without changing rollers.
  • Uses heavy-duty TWECO quality front end consumables
  • Wire Speeds of 1.3 to 23 metres per minute
  • Polarity indicator lights
  • Three metre cable with quick disconnects, can be extended up to 24 metres
  • Built-in gas valve
  • Ground cable attached

In the case

  • MIG gun with three metres of cable
  • One spool of flux core wire
  • 300 amp ground clamp
  • Two battery clamps
  • Extra tips and gas hose fitting
  • Three metres of gas hose
  • Foam lined blow-moulded tough case

Case size 52 x 47 x 15 cm 8kg [including spool of MIG wire]

Click here for the User Manual

Want to know more - go to the Ready Welder site.


Additional Information

SKU 10000-CS
Manufacturer Ready Welder
Item Height N/A
Item Width N/A
Item Length N/A
Item Weight N/A

DNA Off Road Pty Ltd - KC HiLiTES Australia | Melbourne Australia | Ph 1300 GO2 DNA [1300 462 362]