DNA Off Road

Runva winches

2up winch adaptor - Runva winches

Be the first to review this product

Availability: In stock


Quick Overview

Turn your single motor Runva winch into a dual motor pulling machine!
Note: If there are no shipping options available for your address, please contact us.

2up winch adaptor - Runva winches

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 2up winch adaptor - Runva winches


Turn your single motor Runva winch into a dual motor pulling machine!

Compatible with the following Runva winches

  • EWX9500
  • EWX9500-Q
  • EWX9500-Q EVO
  • 11XP
  • 11XP premium
  • EWX12000
  • 13.5XF


  • Made from billet aluminium
  • Quick and easy to install
  • Competition tested
  • Affordable
  • Additional Motors and Solenoids can be supplied

What's included

  • Lower Shaft – installed
  • Lower Shaft double row bearing – installed
  • Lower Pulley and drive Key – installed
  • Drum Bush (suitable for your application) – installed
  • Motor Bearings – installed
  • Lower Double row bearing circlip – installed
  • Shaft Retaining cirlip – installed
  • 2x upper Motor Pulleys – not installed
  • High torque drive belt  – not installed
  • Spreader Bar Bracket (suitable for your application) - not installed
  • Front Cover and Bolts

The 2up Winch Adaptor will increase loaded and unloaded speed considerably. Loaded speed is largely increased

When a 2up Winch Adaptor is fitted the motors share the load of all winching thus increasing motor life and decreasing heat generated. The 2up winch body acts as an extra large heat sink lowering the motor temperatures further.

If one of your winch motors happens to fail you have a back up motor and a fully functioning winch.

By placing the motors above the winch this decreases the total width of the set up facilitating ease of placement and the opportunity to increase drum width.

The 2up adaptor allows for more rope on the drum as the tie bars have been raised (up to 75 mtrs of 7mm synthetic on standard drum is typical).

A 2up Winch Adaptor fitted to a low mount winch is considerably lighter than a 2 motor high mount winch setup. The 2up adaptor kit itself only weighs 5.5 kg (12lb) and is extremely compact. It looks good too!

The 2up Winch Adaptor retains the standard low mount bolting pattern.

If you have a hydraulic or PTO driven winch on your competition rig then a 2up Winch Adaptor is an ideal choice for your electric back-up.

Whilst reliable, hydraulic winches, especially in competition use are very expensive, weighty and command a fair bit of room. The 2up adaptor is about a tenth of the cost and takes up little more room than your everyday low mount electric winch.

Note: WInch is not included

Additional Information

Manufacturer Runva
Item Height N/A
Item Width N/A
Item Length N/A
Item Weight N/A

DNA Off Road Pty Ltd - KC HiLiTES Australia | Melbourne Australia | Ph 1300 GO2 DNA [1300 462 362]